 |
| |
|
| Epos AVS 5.1 Surround System |  | 
click to view larger image | | |
The AVS 5.1 system is the latest Epos Home Theatre package, designed to meet the exacting demands of the discerning listener. This elegant piano gloss black speaker package provides sound quality to match its stunning looks. Constructed in solid MDF cabinets, these sculptured cabinets are painted and polished to a high-gloss finish which is popular in many homes today.
Satellites
The satellite speakers are based on two new drivers from Epos. A metal dome tweeter, similar to the one used in the new ELS8 and a long throw 4 paper-pulp cone mid-bass driver mounted in a pressed steel chassis. These drivers are magnetically shielded. With two forward firing ports they are well suited to being mounted close to a rear wall if required. A multiple order crossover uses high-grade close-tolerance components to maintain high sound quality expected from an Epos speaker. They are voiced for Home Theatre, but are equally suited to music reproduction. A matching elegant AVS metal stand is also available which positions the satellites above furniture to give the best results.
Centre Channel
The centre channel speaker is based on the same drive units used in the satellites. Using two mid-bass drives and one tweeter and forward firing tuning ports, they are a perfect match for any system and are a small enough to fit in most TV equipment stands.
Sub woofer
An attractive powered Sub woofer is supplied in the package. It uses a specially developed 8 paper cone long-throw woofer, with 2 voice coil. Its powered by a custom made 100 Watt analogue amplifier with adjustments for volume, frequency and phase. The woofer is forward firing with a removable cloth grille and large down-firing port. Therefore, it must be mounted on 2 (50mm) high feet, to allow the port to breath. It is supplied with a simple remote control for adjusting the volume and powering on and off. It is cosmetically matched to the centre channel and satellite in high gloss black.
Technical Specifications:
FRONT & REAR SATELLITES:
Type 2 way bass reflex
Power 100 Watts
Impedance 4 ohms nominal
Sensitivity 86dB 2.83V/ 1m
Frequency response 70Hz-19 kHz +/- 3dB
Woofer 115 mm cone woven Kevlar
Tweeter 25mm aluminium/magnesium alloy dome with neodymium magnet
Crossover Second order on woofer and tweeter at 2.5 kHz, with film capacitors in the tweeter section
Cabinet 12mm MDF with internal bracing Finish High gloss black paint
Weight 2.7 kg (5.9 lb)
Dimensions 235 x 130 x 187 mm (9.25 x 5.12 x 7.36 ins) H x W x D
CENTER CHANNEL:
Type 2 ½ way bass reflex
Power 100 Watts
Impedance 4 ohms nominal
Sensitivity 84dB
Frequency response 65Hz-19 kHz +/- 3dB
Woofer 2 x 115 mm cone woven Kevlar
Tweeter 25mm aluminium/magnesium alloy dome with neodymium magnet
Crossover Second order on woofer and tweeter at 2.5 kHz, with film capacitors in the tweeter section
Cabinet 12mm MDF with internal bracing Finish High gloss black paint
Weight 4.8 kg (10.5 lb)
Dimension 130 x 385 x 167 mm (5.12 x 15.2 x 6.57 ins) H x W x D
System weight (gross) 18.1 kg (39.8 kg) (4 satellites and 1 centre speaker in one carton with outer sleeve)
SUBWOOFER:
Type Bass reflex with forward firing driver and down firing port
Internal amplifier 100 Watts
Impedance 4 ohms nominal
Sensitivity 84dB
Bass response 38 Hz (-6dB)
Woofer 200mm (8) with stiff paper pulp cone
Front Power Indication No light, power off. Green power on. Red standby.
Auto On/Off Yes, the unit will go into standby after approximately 15 minutes with no input signal
Inputs and outputs:
Low level LFE Unfiltered
Line level Stereo IN and OUT
High Level Loudspeaker level IN and OUT Controls Volume (also controllable by the remote control)
Variable low-pass filter 40-160Hz
Continuously variable phase control 0-180 degrees
Remote Control with functions, STANDBY/ON, Volume UP and DOWN
Finish High gloss black paint
Weight (gross) 16.1 kg (35.4 lb) Packed in carton with outer sleeve
Mains Voltage 110-120V AC 60Hz or 220-240V 50Hz (factory preset via AC VOLTAGE SELECTOR switch) Please check this is set correctly for your local mains supply
Dimension 380 x 300 x 360 mm (15 x 11.8 x 14.2 ins) H x W x D
Measurement includes 50mm spikes
Weight 12.6 kg (27.7 lb)
|
| |
|
|
|
