FX Tube DAC III
FX Tube DAC III FX Tube DAC III FX Tube DAC III
$ 525.00

An update to Jolida's innovate FX Tube DAC, FX Tube DAC has modern digital features with an old-school tube analog output stage. The FX Tube DAC III allows you to convert your digital files (via S/PDIF, Tos-Link, and USB) using the newest Burr Brown DAC chipsets, and then sends its all-analog waveform through a pair of 12AX7 tubes for the sound all analog lovers crave.

Output Level:                        0 V to 2.3V  (±1dB, 47K ohms)(SIN SIGNAL 0dB SPDIF IN)

Frequency Response:          20-20 KHz   (±0.5dB)

Bandwidth:                            10Hz to 70kHz + 1dB

SNR                                        >90dB ( 20Hz-20kHz)

Dynamic Range                     126 dB

Distortion THD:                    Less than 0.01% (1kHz)

Headphone Impedance        30 Ohms

Circuit Type:                         Ultra Linear, Class AB

Tube Complement:               2 pcs. 12AX7 pre-amplifier

Power Requirements:          110V-120 VAC 60Hz 90 watts-standby, 240 watts maximum (220 VAC 50Hz option)

Dimensions:                          8 inches wide by 7 inches deep by 3 inches high

Weight:                                   7.5 lbs net, approximately 10 lbs.packaged

Warranty:                               6 month limited parts and labor. Three months on the tubes            

Fuse:                                      110 - 120 VAC, 1 Amp slo Blo; 200 - 240 VAC, .5 Amp Slo Blo

Construction Details and Features: 

USB: 24/96 up sampling to 192 Hz

Toslink and coaxial: 24/192Hz 

Galvanic Isolation: ADuM 1250 chips 

Asynchronous Burr Brown Chip AD1896 

Volume control and headphone jack

DAC Chip: PCM 1798

R Style Transformer 

State the Art Components: capacitor filters, gold plated RCA jacks,

Finishes: Black and Silver

Operation fully automatic
Drive System internal flat drive belt
Motor electronically controlled DC motor
Speeds 33-1/3, 45, 78 rpm
Speed Select electronically
Platter 12” / 0.7 kg (aluminium, non-magnetic)
Tonearm THORENS TP 19-1
Pick-up Cartridge AT-95E
Anti-skating (Bias) by spring (adjustable)
Automatic Shut-off mechanically
Cable Capacitance 160 pF
Power Supply external mains adaptor (115-230 V / 50-60 Hz depending on type)
Dimensions 430 x 130 x 365 mm (W x H x D)
Weight 8.5 kg
Finish solid wooden plinth with black piano laquer, black structured enamel, walnut veneer
Scope of Delivery mains adapter, dust cover (acrylic), RCA interconnects, operating instructions